AutoBits™ Vgate iCar Pro V2.2 OBD2 Adapter | Bluetooth 4.0 & WiFi | Android & iOS Compatible

AutoBits™ Vgate iCar Pro V2.2 – The Smartest Way to Diagnose Your Car

Turn your smartphone into a professional car diagnostic tool. The Vgate iCar Pro V2.2 OBD2 Adapter connects wirelessly to your vehicle via Bluetooth 3.0, Bluetooth 4.0, or WiFi — giving you real-time engine data, fault code reading, and full OBD2 diagnostics directly on your Android or iOS device. No expensive scan tools, no garage visits for basic diagnostics.

Key Features

• Triple Connectivity: Bluetooth 3.0 (Android), Bluetooth 4.0 (Android & iOS), and WiFi (Android & iOS) — works with virtually any modern smartphone or tablet.
• Full OBD2 Protocol Support: Compatible with all standard OBD2/EOBD protocols including CAN, ISO, SAE J1850, KWP and more — works with all 12V OBD2 vehicles.
• Read & Clear Fault Codes: Access over 3,000 generic DTC definitions. Read manufacturer-specific codes, clear them, and turn off the check engine light.
• Real-Time Live Data: Monitor engine RPM, coolant temperature, vehicle speed, fuel trim, throttle position, oxygen sensor voltage, air flow rate, and much more — live.
• Ultra-Low Standby Current: Only <30mA standby draw — won’t drain your battery when left plugged in.
• Wide Temperature Range: Operates reliably from -40°C to 85°C — suitable for all climates.
• 100% Original Vgate: Genuine iCar Pro hardware — not a cheap clone. Hardware version V2.2.

Live Data Parameters Monitored

Engine RPM • Coolant Temperature • Vehicle Speed • Calculated Load Value • Fuel System Status • Short & Long Term Fuel Trim • Intake Manifold Pressure • Timing Advance • Intake Air Temperature • Air Flow Rate • Absolute Throttle Position • Oxygen Sensor Voltages • Fuel Pressure • And many more

Connection Methods

• 📱 Bluetooth 3.0 – Android devices
• 📱 Bluetooth 4.0 (BLE) – Android & iOS (iPhone/iPad)
• 📶 WiFi – Android & iOS (iPhone/iPad)

Supported OBD2 Protocols

• SAE J1850 PWM & VPW
• ISO9141-2, ISO14230-4 KWP
• ISO15765-4 CAN (11bit & 29bit, 250/500 Kbaud)
• SAE J1939 CAN
• USER1 & USER2 CAN (adjustable)

Technical Specifications

What’s in the Box?

• 1x Vgate iCar Pro V2.2 OBD2 Adapter
• 1x User Manual

Frequently Asked Questions

What app do I use with the Vgate iCar Pro?

The Vgate iCar Pro is compatible with most popular OBD2 apps including Torque Pro, OBD Fusion, Car Scanner, and the official Vgate app. For Bluetooth 4.0, connect directly within the diagnostic app — do not pair via your phone’s Bluetooth settings.

Does this work with iPhone (iOS)?

Yes. Use the Bluetooth 4.0 or WiFi connection mode for full iOS compatibility. Bluetooth 3.0 is Android only.

Will this OBD2 adapter work on my car?

If your vehicle is a 12V petrol or diesel car made after 2001 (EU) or 1996 (US), it will be OBD2 compatible. The Vgate iCar Pro supports all standard OBD2 protocols.

Can I leave the adapter plugged in permanently?

Yes. With a standby current of only <30mA, the iCar Pro draws minimal power when not in use and is safe to leave plugged into your OBD2 port.

How do I connect via Bluetooth 4.0?

Do not pair via your phone’s Bluetooth settings. Instead, open your OBD2 diagnostic app and connect to the iCar Pro directly from within the app.

Is this a genuine Vgate product?

Yes. This is a 100% original Vgate iCar Pro V2.2 — not a clone or counterfeit. Genuine hardware ensures reliable connectivity and accurate diagnostic data.